CHANGING THE KEG

Step 1

Disconnect empty keg and tap a fresh keg

Step 2

Push down and hold vent knob, and allow the chamber to refill with clear beer. While venting, a small amount of beer and foam will escape through the vent line.

Step 3

Push in the round handle (float release), the float will rise to the top of the chamber and allow beer to flow to the faucet.

Step 4

Pull out the round handle(float release)to work position, you are ready to pour beer.

CLEANING INSTRUCTIONS

Step 1

Disconnect keg and connect line to cleaning system.

Step 2

Push in the round handle (float release) to clean position to prevent float from seating.Clean beer lines.

Step 3

Push down & hold vent knob to allow cleaning solution to fill chamber and exit through vent. This will clean the chamber, vent and drain.

Step 4

Rinse with water. Repeat Step 3 while rinsing with water.

Step 5

Once cleaning is complete and you are ready to reconnect beer, pull out the handle (float release) to work position and repeat step 1-4 as per“Changing the keg”.

Hot Sales: Beveage fitting, Beer nut, Stainless steel check valve, Brass check valve,Quick disconnect and OEM, Gas manifold, Beer tap, Keg coupler, FOB detector, Beer tower, Beer shank

In order to ensure the high quality, our factory has introduced a large number of precise and modern equipments from Japan, also owns many advanced inspection and measurement  instructions.

Please kindly look though our equipment pictures. <-

If you want to know more about us, you can also enter our another website: https://cnzjgaowei.en.alibaba.com/ <-

Ifyou are interested in our products, please feel free to contact us. <-